This is topic Car won't stay on in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013533
Posted by COBRAreflection (Member # 5247) on
:
Alright guys, on my 91 GT I took off my kenne bell and the 42ibr's, it ran fine with it on there except for ideling at times, but I put the cobra intake and the stock injectors back on, and now it cranks and turns on, but it idels to about 6000 rpm and turns off right away. I'm stuck, I've already tried changing the TFI module, what else should I be looking at?
Posted by 91 droptop (Member # 6260) on
:
check for vac leak
Posted by 92stangLX (Member # 3252) on
:
Serious vaccum leak. First thing I would check in the uppper to lower intake gasket alignment.
Posted by COBRAreflection (Member # 5247) on
:
Yeah I have the 1 inch spacer, tried with that, and the other regular gaskets, but no progress. Any other sensors or the computer, don't know the symptoms of that.
Posted by 92stangLX (Member # 3252) on
:
quote:
Originally posted by COBRAreflection:
Yeah I have the 1 inch spacer, tried with that, and the other regular gaskets, but no progress. Any other sensors or the computer, don't know the symptoms of that.
Are you using two gaskets with the spacer? Also, check your vaccum lines. I had the exact same problem. It was my upper to lower gasket not being seated properly.
Fueled by Ford Mustang Owners
on CaliforniaFords.com