This is topic tps in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013443
Posted by 89 stang gt (Member # 1877) on
:
how do i set the volts on a tps on a 5.0???
Posted by putter (Member # 4253) on
:
If you have or are gonna buy a digital volt reader? then I will explain everything completly.
Posted by 89 stang gt (Member # 1877) on
:
yea i will how do u do it?
Posted by putter (Member # 4253) on
:
Probe the green and black wire with your meter with the key on, engine off. The reading is optimal at .98-.99 or so but people have gone less with good results just get it under 1. If you cant get it under 1 enlarge the hole with a drill to allow more adjustment. Also it will need to be moved counter clockwise to lower the reading.
[ February 27, 2006, 02:17 PM: Message edited by: putter ]
Posted by NO MANRZ (Member # 566) on
:
http://www.muscularmustangs.com/tps.php
The wire colors are the same for foxbodies. You want 0.85 to 0.95 volts. Prefably somewhere in the middle.
Posted by mf150 (Member # 6526) on
:
on the newer stangs, you will get a reading of .5-1V at idle and increasing to 4-5V at WOT.
Posted by NO MANRZ (Member # 566) on
:
ODB II cars including the 94-95 stangs automatically zero in the TPS voltage via the EEC so you don't need to play with the TPS voltage. It's only a foxbody thing.
Fueled by Ford Mustang Owners
on CaliforniaFords.com