This is topic underdrive pulley help in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013339
Posted by two-gun kid (Member # 5891) on :
 
ok i got the alt and water pump pullies on and the only problem i have is the crank pulley, i cant fit a socket on the bolt becuase there isnt any room in between the bolt and pulley. any ideas?
 
Posted by NO MANRZ (Member # 566) on :
 
Your kit should have came with 4 special alan head bolts:

-


The crank pulley is were most of the power gain is.
 
Posted by two-gun kid (Member # 5891) on :
 
nope they didnt come with those, i got the pullies off taron, where can i find those bolts?

[ February 18, 2006, 05:10 AM: Message edited by: two-gun kid ]
 
Posted by mf150 (Member # 6526) on :
 
just trying to figure out what is going on...lol

nvrmind

though it was a modular

[ February 18, 2006, 05:15 AM: Message edited by: mf150 ]
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by mf150:
just trying to figure out what is going on...lol

nvrmind

though it was a modular
nvm,you edited your post
 
Posted by NO MANRZ (Member # 566) on :
 
quote:
Originally posted by two-gun kid:
nope they didnt come with those, i got the pullies off taron, where can i find those bolts?
Don't know who Taron is, but you'd probably find those 4 bolts in his garage [Smile]

Your next bet is taking one of your stock bolts to OSH and getting an allen headed version of it, IF they carry it.
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by NO MANRZ:
quote:
Originally posted by two-gun kid:
nope they didnt come with those, i got the pullies off taron, where can i find those bolts?
Don't know who Taron is, but you'd probably find those 4 bolts in his garage [Smile]

Your next bet is taking one of your stock bolts to OSH and getting an allen headed version of it, IF they carry it.
taron=svt306snake, would kragen or vic hubbards have them?

[ February 18, 2006, 05:28 AM: Message edited by: two-gun kid ]
 
Posted by NO MANRZ (Member # 566) on :
 
Cheapest is Tarons garage. Second cheapest is probably OSH. Don't know about kragens and if Vic doesn't have it, they can order it for you.
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by NO MANRZ:
Cheapest is Tarons garage. Second cheapest is probably OSH. Don't know about kragens and if Vic doesn't have it, they can order it for you.
thanks for the help.
 
Posted by NO MANRZ (Member # 566) on :
 
Put WD40 on all your pulley bolts so they'll not only go in easier, but also come off easier when you have to take them off. I find this especially true for the water pump pulley.
 
Posted by two-gun kid (Member # 5891) on :
 
quote:
Originally posted by NO MANRZ:
Put WD40 on all your pulley bolts so they'll not only go in easier, but also come off easier when you have to take them off. I find this especially true for the water pump pulley.
the crank was the hardest one to get off, i had to spray wd40 on it, the water pump just slide right off and i had pepboys change the alt pulley
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com