This is topic gt 40 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013324
Posted by WayFastYTee (Member # 6116) on :
 
what year explorers had the gt-40 intake and heads on them?.and will they bolt up to my stock 302 with NO problems at all?thanks

[ February 17, 2006, 06:34 AM: Message edited by: WayFastYTee ]
 
Posted by Dag302 (Member # 4682) on :
 
Will not bolt up to a stock 302 lower. It has to be a Cobra or GT-40 lower. Even then you will have to plug the egr port on the lower because the explorer upper does not have the runner in the manifold.
 
Posted by NO MANRZ (Member # 566) on :
 
I think he meant to his stock 302 bottem end, which they will bolt up to just fine. The stock valve springs are weak and the P heads don't work with all headers.
 
Posted by Dag302 (Member # 4682) on :
 
my bad, it was late!!!!
 
Posted by NO MANRZ (Member # 566) on :
 
Not your fault. The original post exhibited poor grammar and sentence structure [patriot]
 
Posted by 1quik69 (Member # 5481) on :
 
1996 & early 97 had the GT40 heads. Mid 97 on had the GT40p heads which take a special header if you use them. The early manifold will have the suffix BA on the numer on the front of the manifold.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com