not a ford question but need some help - Northern California Ford Owners

This is topic not a ford question but need some help in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=013102

Posted by WayFastYTee (Member # 6116) on :

Anyone ever done brakes on a acura integra i think its like a 1993 or so.its my sisters car and needs her brakes done,any special tools i would need?easy brake job?any help would be appreciated,thanks

Posted by 03SHKER (Member # 1397) on :

If they're anything like an 02 Civic, they're cake. You doin just front or rears also?

Posted by WayFastYTee (Member # 6116) on :

front and rear.(both disc)

Posted by subsGT (Member # 6015) on :

quote:
Originally posted by WayFastYTee:
front and rear.(both disc)

easy job...how many miles on them?

Posted by WayFastYTee (Member # 6116) on :

have no idea,just know they dont stop that well..lol

Posted by 03SHKER (Member # 1397) on :

They'll be cake man.

Posted by TrickRacer50 (Member # 6345) on :

They are easy. If you want to remove the disk you will need a 32mm socket to get the axle nut off. Then I would use an impact tool (you hit with a hammer) to remove the screws that hold the disk to the spindle.

If you just change the pads then you just undue one bolt (as memory serves) pull the old pads and put in the new ones. It is that simple.

Posted by 92stangLX (Member # 3252) on :

If they are anything like the newer model Honda's you may need a special tool to remove the screws that hold the rotors on.

I would call an Acura dealer to find out for sure.

Fueled by Ford Mustang Owners
on CaliforniaFords.com