This is topic I really need help !!!!!! in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=012979

Posted by civickiller5.0 (Member # 5991) on :
 
Ok I know I may ask alot of dumn questions but, I need help installing a Cobra insert. I got it from a friend and he lost the instructions and I wanted to know what would be the best gears for a auto foxbody (3.73, 4.10 ) really don't know I am starting to fix this stang up a little. So i'm not really sure what to put in it.
 
Posted by PWR HNGRY 302 (Member # 6000) on :
 
I like 3.73's you dont really need anything higher than that if your going to do a lot of street driving.
 
Posted by SmokinLX (Member # 1684) on :
 
I have 373 in My auto and they have been a good all around gear from basically stock to HCI & charged. If You aer'nt planning on adding a power adder down the line 4:10's might be a good choice.
 
Posted by GRIGGYJAMESJIMBO (Member # 6319) on :
 
PERSONALLY FOR AN AUTO- IF YOU REALLY WANT IT TO PULL HARD AND STEADY IT WILL BE BEST TO GO WITH 4:10 GEARS- EVERY FOXBODY AUTO THAT I HAVE EVER OWNED HAS HAD THEM- GO FOR THE 4:10 BRO- [patriot]
 
Posted by civickiller5.0 (Member # 5991) on :
 
I was told that 4.10 gears was the best to go with by friends but they also said that if I was planning on driving along ways that it would burn my trans or rear end up !!!!! [Confused]

[ January 13, 2006, 10:04 PM: Message edited by: civickiller5.0 ]
 
Posted by svt306snake (Member # 1967) on :
 
4:10 and an auto are like a hand and glove man that the right combo and you wont burn anyting up
 
Posted by hidnn.o.s. (Member # 1219) on :
 
quote:
Originally posted by civickiller5.0:
I was told that 4.10 gears was the best to go with by friends but they also said that if I was planning on driving along ways that it would burn my trans or rear end up !!!!! [Confused]

I wouldn't listen to those friends EVER
 
Posted by Jdub07 (Member # 2728) on :
 
If your stuck between 3.55's and 3.73's then go 3.73's. If your stuck between 3.73's and 4.10's then go 4.10's and so on. [burnout]
 
Posted by 94gt (Member # 3060) on :
 
JohnB put 3.73's in my old auto 94gt... I really liked them. Made a big difference to the butt-o-meter! [Razz]
I ended up putting a vortech on my 94gt and I was glad that I had 3.73's installed.
 
Posted by SmokinLX (Member # 1684) on :
 
quote:
Originally posted by 94gt:
JohnB put 3.73's in my old auto 94gt... I really liked them. Made a big difference to the butt-o-meter! [Razz]
I ended up putting a vortech on my 94gt and I was glad that I had 3.73's installed.

Exactly I am probably going to be close to the end of 3rd gear going through the trap's with My 373's now, so I am glad that 9 Year's ago when I swapped gear's that I went with the 373's.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com