This is topic 5 lug conversion in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=012957
Posted by v-town coupe (Member # 2771) on
:
jus wondering which 5 lug rear ends will work in a fox? and is it true 99 and up were 31 spline axles? if so will a 99 jus drop right in thanx!
Posted by BlackNGold (Member # 655) on
:
94+ solid axles are 5 lug, and as far as I know they're all 28 spline...
*(I think) 98's axle housing Are .5" wider on each side comparted to the 94 and the 99 axle housing is 3/4" wider...
Good luck
Posted by PWR HNGRY 302 (Member # 6000) on
:
This might help. click here
Posted by BlackNGold (Member # 655) on
:
quote:
Originally posted by PWR HNGRY 302:
This might help. click here
Good link...
Posted by PWR HNGRY 302 (Member # 6000) on
:
[ January 13, 2006, 05:09 PM: Message edited by: PWR HNGRY 302 ]
Posted by Luke87GT (Member # 21) on
:
Incorrect.
The link above is my personal page. I wrote it.
94-98 axles were 0.75 inches longer per side than 87-93. 99+ were even longer than that.
Do not try to use 99-up axles on your car.
The 99+ rearend will physically bolt up BUT there are no caliper brackets that will fit 99-up axles on a non 99-up axle housing.
Stay with 94-98 stuff and you'll be fine.
If you are gonna use 17x9 or larger, use ranger/aerostar axles and the north cobra caliper brackets.
If anything is unclear read my site. I will not answer any questions that I took the better half of a day to write on my site.
Good Luck.
Posted by yipnip5.0 (Member # 175) on
:
quote:
I will not answer any questions that I took the better half of a day to write on my site.
Posted by v-town coupe (Member # 2771) on
:
thanx for all the help!
Fueled by Ford Mustang Owners
on CaliforniaFords.com