This is topic 04 cobra blower pulley in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=012017

---

Posted by mr mach ef (Member # 4025) on :
 
i am going to get the 2.80 blower pulley for my cobra but does it really matter what company makes it or all they all the same? any favs or recomendations?
 

---

Posted by Lonewolf (Member # 4968) on :
 
www.svtperformance.com Look in the terminator section.. do a search plenty of info.. looks like billit flow is mentioned a lot
 

---

Posted by mr mach ef (Member # 4025) on :
 
yeah, someone has also mentioned that one, thanks
 

---

Posted by Jeff S (Member # 371) on :
 
The brand of the blower pulley doesn't make any difference.
 

---

Posted by mr mach ef (Member # 4025) on :
 
went with the 2.76 billetflow pulley, hey jeff s. i hear you do awesome tuning, im gonna need my car tuned after my stuff gets installed next week.
 

---

Posted by TRIXSNK (Member # 2844) on :
 

quote:

---

Originally posted by mr mach ef:
went with the 2.76 billetflow pulley, hey jeff s. i hear you do awesome tuning, im gonna need my car tuned after my stuff gets installed next week.

---

You'll be happy with that 2.76 especially with the vert....but that's until you run up against one with a 2.76 and a port
 

---

Posted by Jeff S (Member # 371) on :
 

quote:

---

Originally posted by mr mach ef:
went with the 2.76 billetflow pulley, hey jeff s. i hear you do awesome tuning, im gonna need my car tuned after my stuff gets installed next week.

---

No problem. Give me a call whenever you are ready!
 

---

Posted by mr mach ef (Member # 4025) on :
 
right on, thanks jeff.
 

---

Posted by sharkattack (Member # 645) on :
 
Did you get the idlers too?
 

---

Posted by mr mach ef (Member # 4025) on :
 
yeah, got the whole set up
 

---

Posted by mr mach ef (Member # 4025) on :
 
hey jeff can u guess what hp i'd be able to get me with the tune??? i got the
4.6L/5.4L DOHC 4V Xtreme Energy Camshafts
RPM Range: 2000-6400 RPM
Adv. Duration: 273°/275°
Duration @ .050'': 238°/240°
Valve Lift: .475''/.450''
Lobe Separation: 116° comp cams,knn fipk, bbk tb,bassani mid length bassani o/r x, n bassani catback, the pulley 2.76 sc pulley, hci is gonna prot the tb inlet and s/c. i had 395rwhp with just the knn fipk and bassani catback. thanks again

[ September 28, 2005, 08:02 PM: Message edited by: mr mach ef ]
 

---