This is topic lower intake ? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011990
Posted by losbadgt (Member # 4394) on :
 
well last week when to the track and blew off the freezer plug, from what people say, today i took of my lower intake and was thinking of replacing it but i have better plans later on(better heads and p-51 intake), so for now i just want to buy the plug and weld it, but today when i took of the intake i found a crack on top of the hole, can i weld that too, btw this is a plastic intake so just wondering where i could find a place that could weld plastic.
here a pic of the crack and the hole with my finger in it [Big Grin]
-
 
Posted by two-gun kid (Member # 5891) on :
 
maybe try some jb weld.
 
Posted by blind (Member # 3052) on :
 
plastic is "welded" with a soldering iron and a shitty tip usually, but it will probably crack again in the same place or right next to it
 
Posted by Apexmotorsports (Member # 5307) on :
 
You can give TAP Plastics a call and see if they can help you out.

Mike Mak
Apex Motorsports
ApexMotorsports.com
2555 Lafayette Blvd. Suite #122
Santa Clara, CA 95054
Phone: 408/588-0075 Fax: 408/588-0089

Griggs Racing, Maximum Motorsports, Evolution Motosports, SCT, Racelogic, H&R, Ford racing, Kenne Bell, MAC, Bassani, Vortech, Powerdyne, AMSoil, Koni, Hawk, AFR, Tokico, Baer Racing, Magnaflow, Flowmaster, Diablosport
 
Posted by losbadgt (Member # 4394) on :
 
do u have the # of the tap plastic place.
 
Posted by Apexmotorsports (Member # 5307) on :
 
This is the closest one to you.

Tap Plastics
606 South B Street
San Mateo, CA 94401
Open: Mon-Fri 8 to 6, Sat 9 to 5.
Phone: 650.344.7127
Fax: 650.344.5706

Mike Mak
Apex Motorsports
ApexMotorsports.com
2555 Lafayette Blvd. Suite #122
Santa Clara, CA 95054
Phone: 408/588-0075 Fax: 408/588-0089

Griggs Racing, Maximum Motorsports, Evolution Motosports, SCT, Racelogic, H&R, Ford racing, Kenne Bell, MAC, Bassani, Vortech, Koni, Hawk, AFR, Tokico, Baer Racing, Magnaflow, Flowmaster, Diablosport, $3 Nitrous Refills
 
Posted by JohnB (Member # 969) on :
 
Do yourself a favor and get a replacement intake. If it was weak enough to crack/split at this spot...there are other weak spots. Do you really want to pay to have it fixed, only to have it happen again? [Confused]
 
Posted by Hungry Hippo (Member # 537) on :
 
probably be cheaper just to buy a used one.
 
Posted by losbadgt (Member # 4394) on :
 
thanks guys, i just won one on ebay so going to wait for that one to come in the mail.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com