This is topic NEED HELP !!!!1 FLYWHEEL & STARTER GRINDING. in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011838
Posted by STrim209StaNg (Member # 4220) on
:
ok I got '89 stng 5.0 convt. everytime i start the car you can here a grinding noise. so i change the starter and it made no diferrent. still grinds until the car engine wont even turn. so i decided the take out the trannny and see whats was going on. the flywheel tooth has grinding mark. metal chip from the teeth of the flywheel. so i tought it was the cause of it. but got a new flywheel 157 tooth. put it in. start it up it was the same crap. grinding noise. drove the car for aout a week until the motor wont enev turn. all you hear the starter spinning? any quess here guest. is it the starter/ flywheel? kinda tired of this crap. need help guys.
Posted by illwill510 (Member # 3788) on
:
i have the same problem
Posted by STrim209StaNg (Member # 4220) on
:
did u figure out what was wrong w/ it?
Posted by illwill510 (Member # 3788) on
:
nope
Posted by carajo (Member # 4426) on
:
do you have your mid-plate on.(plate in middle of engine and trans)
Posted by illwill510 (Member # 3788) on
:
yes
Posted by STrim209StaNg (Member # 4220) on
:
finally I found out what the problem was. it was the starter. I went to switch out the starter for a mini hi-torque one and it didnt grind at all. should have done dat before but i didnt. the old starter was the big/heavy one.
Fueled by Ford Mustang Owners
on CaliforniaFords.com