This is topic 5 lug brake question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011758
Posted by nor*cal93ssp (Member # 3884) on :
 
anyone running a front 5 lug. setup using '96-up spindles with '99-up pbr calipers? if so did u guys have problems with the brakline fitting on the pass. side threading onto the brake hose (appears fitting is bigger the thread size on brakehose)? lmk how u guys got around that. thanks
 
Posted by h8louzn (Member # 1075) on :
 
I'm not sure cause I didn't do that conversion.
But I think you have to get an adapter from napa or somewhere cause 1 is standard thread and the other one is metric. This is just from what I have read.
Good luck!
Eddie
 
Posted by Luke87GT (Member # 21) on :
 
All those questions are answered here...

http://www.mustangmotorsport.com/sn95conversion.html

After reading it, if you have any questions PM me...
 
Posted by nor*cal93ssp (Member # 3884) on :
 
thanks alot guys...i actually got thst fitting that i needed before i read your replies. *weatherhead #7828...its a must! [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com