This is topic Are fox front control arms the same as sn95's in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011574
Posted by gercolla1 (Member # 3068) on :
 
I am gettin' ready to order some control arms. I am goin to run sn95 spindles as well. I will order the sn95 control arms if they are the same. I want to use the sn95 ball joints. Or, do I have to buy the ones for a fox and change the ball joints myself, which I would like to avoid. Also I don't wan't to have to use a spacer or stack washers to use fox ball joints and newer spindles. [burnout]
 
Posted by vpr_klr (Member # 3353) on :
 
the sn95 control arms are longer, which will push the wheels out more. Which is fine if you get the correct size offset wheel but then your choices are really limited. You can use fox control arms with sn95 ball joints. I have a tubular k-member, and when I used to run this car on the street, I had the fox tubular a-arms, with steeda x2(sn95) ball joints, and sn95 spindles and 13" cobra brakes.
 
Posted by gercolla1 (Member # 3068) on :
 
[patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com