Author
|
Topic: Are fox front control arms the same as sn95's
|
gercolla1
¯
Member # 3068
|
posted
I am gettin' ready to order some control arms. I am goin to run sn95 spindles as well. I will order the sn95 control arms if they are the same. I want to use the sn95 ball joints. Or, do I have to buy the ones for a fox and change the ball joints myself, which I would like to avoid. Also I don't wan't to have to use a spacer or stack washers to use fox ball joints and newer spindles.
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
vpr_klr
¯
Member # 3353
|
posted
the sn95 control arms are longer, which will push the wheels out more. Which is fine if you get the correct size offset wheel but then your choices are really limited. You can use fox control arms with sn95 ball joints. I have a tubular k-member, and when I used to run this car on the street, I had the fox tubular a-arms, with steeda x2(sn95) ball joints, and sn95 spindles and 13" cobra brakes.
-------------------- Project crustang has begun 14 mustangs and counting...
Posts: 893 | From: Livermore | Registered: Oct 2003
| :
|
|
gercolla1
¯
Member # 3068
|
posted
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
|