This is topic fuel gauge need removal & reinstall ques. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011482

Posted by gercolla1 (Member # 3068) on :
 
I have to change the resistor behind my fuel gauge. The gauge always reads red empty. Eventually I will have to remove the needle pointer to do the job. When I replace the needle,how do I position/point it now? There is no dowel or notch in either the pin or needle. This needle can be positioned anywhere! How do I establish some type of base-line setting? [burnout]
 
Posted by Mr JoCo (Member # 1549) on :
 
do it on a full tank and put it where you want it to be at a full tank.
 
Posted by gercolla1 (Member # 3068) on :
 
Ya know, I was thinking just that but the opposite, an empty tank. I reason that an empty tank is something to keep a closer eye on. But, that means I have to run the car completely out of gas first. [dance]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com