This is topic power steering pulley in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011481
Posted by z pyro (Member # 3745) on
:
the ps pulley needs a puller to remove it, right?
and I still need a pic of the vac hose routing for a cobra intake. I had to get a longer piece of hose for the PCV, but i don't know what else goes where on the upper.
Posted by mtbaughs (Member # 4052) on
:
Here's a link for vacuum....
http://www.veryuseful.com/mustang/tech/engine/88Stang5.0Vacuum.gif
You'll need a puller but you can borrow one from you local auto parts store...so don't buy one
[ June 24, 2005, 05:07 PM: Message edited by: mtbaughs ]
Posted by evintho (Member # 5536) on
:
quote:
Originally posted by z pyro:
the ps pulley needs a puller to remove it, right?
Yep! See if they have a free loaner at Autozone, if not..........
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=40749
Posted by z pyro (Member # 3745) on
:
quote:
Originally posted by mtbaughs:
Here's a link for vacuum....
http://www.veryuseful.com/mustang/tech/engine/88Stang5.0Vacuum.gif
thanks for the pic, but i need to know what fittings go where on the cobra upper. on mine there's an open spot and i don't know what kind of fitting goes there and where the vac line would go
Posted by z pyro (Member # 3745) on
:
anyone have pics of the underside of the cobra upper, and know where each vac line goes??
Fueled by Ford Mustang Owners
on CaliforniaFords.com