This is topic oil in intake in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011333
Posted by Cstang50 (Member # 4925) on
:
I noticed my pcv valve is sucking oil into the intake it is a performer intake it has done this with two different motors what would cause this? please help thanks
Posted by BlackNGold (Member # 655) on
:
I had the same problem with my Edelbrock Performer intake...Just make sure that the oil baffle on the lower intake is on right, and the PCV is in working order...I've had bad luck with Fram or other cheap PCV valves and only buy Ford Motorcraft PCV's....
There are a few ways you can fix it, but the best results I got were just to disconnect the PCV and install breathers...I found a K&N breather that will fit into the location of the stock PCV and used a Ford Racing oil cap breather(K&N was too big for my cold air piping) and capped everything else off...I wouldn't recommend this way, just because your oil will get contaminated faster and PCV systems get rid of crankcase pressure which adds horsepower...But taking on all that oil in my intake wasn't helping my horsepower much...
Good luck....
Fueled by Ford Mustang Owners
on CaliforniaFords.com