This is topic Vortech S-trim questions??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011311

---

Posted by lightning89mg (Member # 2673) on :
 
Hey everyone, I have a 95 gt mustang with a vortech (B1) s-trim kit. I have two questions...
First, is there any way to quiet down the blower a little bit at idle? I want to lower the noise a bit more at idle and was wondering if there is anything you can do/buy?
Second, Whats the biggest size pulley I can run on a stock motor. I can see up to about 7-8 psi, and was wondering safely, without a tune and the fmu if I can run a bigger pulley size?
Thanks!


Marc G
 

---

Posted by SilverLX351 (Member # 3207) on :
 
you cant make it quieter unless you turn the idle up or down...
 

---

Posted by HungryHippo (Member # 537) on :
 
or get a v2
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
a bigger blower pulley makes less boost. Is that what your after?
 

---

Posted by 91 5.0 (Member # 1527) on :
 
You need a SMALLER blower pulley to make more boost.
 

---

Posted by 92stangLX (Member # 3252) on :
 

quote:

---

Originally posted by HungryHippo:
or get a v2

---

The V2 is the quite blower.

To be on the safe side you should stick w/ 8lbs of boost. You may be able to get away with more but I wouldn't try unless you get the car tuned. The result could be a blown head gasket or worse
 

---