This is topic which heads and which cam ?'n in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011142

---

Posted by gercolla1 (Member # 3068) on :
 
Current set-up
302 stock block
Cobra intake
GT-40 irons
B-303 w/1.7 rockers

I have a trick flow stage 1 cam sitting around.
should I pick up some edelbrocks or afr's to upgrade my engine? Also, should I keep the B-303 cam in there or swap to the trick flow stage 1 with which ever heads? Don't know what to buy or what to use or stick with.
 

---

Posted by 93PONY (Member # 60) on :
 
AFR's would probably make more AVG power then the Edelbrocks...but either will make more then the GT40's.

Keep the B w/1.7's & retard it 4 degrees with the Edelbrocks, & 6 degrees with the AFR's. (trust me. )
 

---

Posted by BlownMach1 (Member # 5400) on :
 
i ran the same set up with my hatch but switched to the trick flow street intake and it helped a lot.i would keep your cam,the TFS cam sucks if you dont run the whole TFS package.i beat a lot of cars in my hatch with aluminum heads and 2 of my friends have the gt-40 irons and they in the 12's.AFR heads will get you more but for the $ you can put elsewhere and still have a fast car.
 

---

Posted by 92stangLX (Member # 3252) on :
 
I would run Trick Flow Twisted Wedge Heads with the TFS stage 1 cam.
 

---

Posted by HungryHippo (Member # 537) on :
 
the afr's and what 93pony said will get you 30rwhp or more if your cam is dot to dot right now
 

---

Posted by -NORCALCOBRA- (Member # 2383) on :
 
We have a set of canfield and edelbrocks at the shop I like the canfields my self..We did a 327 with ported canfield that made over 550 n/a i belive
 

---

Posted by -NORCALCOBRA- (Member # 2383) on :
 
http://www.kkpony.com/ go to the new 327 section there is plenty of info there on the heads some differnt cams and the motor build up..
 

---

Posted by -NORCALCOBRA- (Member # 2383) on :
 
Gt 40 irons 1.84 int./1.54 exh.



Edelbrock Performer cylinder heads flow @ 28 inches 0f h20 This is with a 1.9 int. and 1.60 exh. valve

Lift Int. Exh.
.100 72 57
.200 131 105
.300 185 121
.400 214 156
.500 223 168
.600 226 153

A.F.R 165 with 1.90/1.60



A.F.R 185 2.02int/1.60 exh.



AFR 205 2.08 int/1.60 exh.



Canfield



[ May 14, 2005, 01:22 PM: Message edited by: -NORCALCOBRA- ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com