This is topic pulling heads in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011058
Posted by SlowStockFox (Member # 1081) on :
 
do i have to remove the rr? i have the intake,dist,valve covers off and im ready to pull the heads?
 
Posted by 91 5.0 (Member # 1527) on :
 
what is the rr?
 
Posted by 91 5.0 (Member # 1527) on :
 
oh, if you're talking about roller rockers, then yes, take them off cause they're going to have to come off before the heads go back on anyway. [patriot]
 
Posted by 66 AC COBRA (Member # 904) on :
 
quote:
Originally posted by SlowStockFox:
do i have to remove the rr? i have the intake,dist,valve covers off and im ready to pull the heads?
you might as well take them off, they will have to be loosened and reset on reassembly anyway

pulling the heads off with the pushrods still in is kind of a pain, especially with iron heads, the weight

will only take a minute, take the rockers off and take out the pushrods, then get those jr's off


word of advise, IIRC some of the lifters cannot come out or go in when the heads are on

so when you re assemble the motor, make sure to have the lifters, cam, and everything put together before you slap the heads on, dont want to take everything apart again
 
Posted by SlowStockFox (Member # 1081) on :
 
the head shave a stamp on them... jr what type of heads are these. that the only stamps they have?
 
Posted by SlowStockFox (Member # 1081) on :
 
got em
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com