This is topic B-41 cam ?? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011033
Posted by Rob [5LVENOM] (Member # 2282) on
:
Just bought this cam. Was running good old E-cam forever with iron GT-40s, and 1.7s(95 cobra topend) finally decided on doing the topend, AFR 185s are here, the B-41, Ed Curtis springs, and a 2.85 pulley to keep the boost as close to where its been, as I can, currently see 15psi with 6.87/2.95.
Car made 476/468 at the wheels last dyno at 5800 going lean, but I have a brand new PMS to install at the same time, as the heads, cam etc, and should pick up something from a more dialed in tune then my old unchanged autologic chip.
Just wanted thoughts on people who HAVE this cam, or who HAVE RUN this cam.
I'm guessing around 550ish after heads cam and PMS tune are done, any other guesses? Mainly cam opinions though, cam #s are 228/236 duration, .544/.568 lift(with 1.6s) on 112. I will still be using 1.7s
[ April 30, 2005, 04:56 PM: Message edited by: Rob [5LVENOM] ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com