This is topic Acceptable size tire for 10.5"x17" in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=011003
Posted by CobramanPhil (Member # 2170) on
:
Just a quick question, but what are the acceptable tire sizes for a 10.5"x17" rear tire of a sn95 mustang? A lot of people put a 315/35/17 sized tire, but there are not a lot of tire brand selections in that size. Is it ok to go for something like a 285/40/17..? What do you guys think???
Posted by 94gt (Member # 3060) on
:
ive heard of guys using all the way up to 305 or even 315's
did you get all your cobra-r stuff yet?
Posted by NO MANRZ (Member # 566) on
:
The 285 BFG KDW's work great on that size wheel.
Posted by HungryHippo (Member # 537) on
:
most people use 315's but the contact patch with 285's is much better
Posted by TRIXSNK (Member # 2844) on
:
quote:
Originally posted by HungryHippo:
most people use 315's but the contact patch with 285's is much better
W/ a 10.5 inch rim
I would think the 315 would have a better contact area vs a 285 ...not too mention more "meat" to protect the lip of the rim(s)however that's personal preference.
If you run a DR you could always use some Nitto 315's as they run a bit smaller than most.
Posted by RixSikCobra (Member # 5058) on
:
Got Nitto 285's, they work great, but go with the 315's, I am next time.
Posted by 8850GT (Member # 4943) on
:
my buddys got 17x10.5 bullets on his stang and he runs the BFG drag radials in 315-35-17...looks great! 315 all the way!
Posted by HungryHippo (Member # 537) on
:
i'm just saying, with a 315 and 32psi, the outer edges barely contact the ground. if you deflate them when you're about to run them, then they'll work better than a 285.
Fueled by Ford Mustang Owners
on CaliforniaFords.com