This is topic which bumpsteer kit? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010967

---

Posted by gercolla1 (Member # 3068) on :
 
I need a bumpsteer kit for a fox body/rack using 96 sn95 spindles.There are kits for up to 93 and 94 and so on.Which do I order?And are the competition engineering sets from summit any good?They cost like $130 there.
 

---

Posted by mtbaughs (Member # 4052) on :
 
You need to order a set for whatever year the rack is. So in your case for a fox body. I would not order the competition engineering brand as I found the sleeves to run too short to work on all cars. I've always used the ones from Griggs Racing. I'm sure MM ones are good as well.

[ April 22, 2005, 10:11 PM: Message edited by: mtbaughs ]
 

---

Posted by cdog301 (Member # 5136) on :
 
hey man do not I say again do not use 1996 spindles they are too long and they take your track width out too far 1/2 inch will rub badly learn from my mistake get some 1994/5's !
good luck
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com