This is topic Centerforce Dual Friction clutch??? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010954
Posted by 1992gtdrop (Member # 4502) on
:
Well my king cobra clutch has started to slip and it's time for a new clutch. I've been thinking about getting a CF DF clutch, but I did a search on the subject some had good/bad things to say about them.
I looking for a clutch that grabs great, minimal pedal effort, no chatter, and will last fairly long. My car is fairly stock except for an O.R. H-pipe and flows and 3.73 are going in soon. I do a fair amount of street driving if that makes any difference. I don't drive my car that hard, but like to occasionaly get on it in 1st and 2nd when I'm feeling frisky. What would you recommend CF or something else?
Thanks
Gus
[ April 21, 2005, 11:08 AM: Message edited by: 1992gtdrop ]
Posted by cdog301 (Member # 5136) on
:
Zoom king cobra (kevlar) works great in my coupe!
Posted by FasterDamnit (Member # 442) on
:
I recommend it.
Little stiffer than stock, but not by a lot. No chatter, smooth, controllable engagement. Handled my 315rwhp '92 and LOTS of drag racing w/out incident. Hit lo 1.6 60ft's and ran 11.90 at 115.
Posted by 1992gtdrop (Member # 4502) on
:
I am also thinking of getting an aluminum flywheel can you recommend any good ones.
Thanks
Gus
Posted by SilverLX351 (Member # 3207) on
:
I also have one in my LX. I like it a lot.
Posted by foxstang (Member # 4688) on
:
i also have a centerforce, i love it, grabs hard and doesnt require that much pedal effort, call centerforce about the flywheel, i think there are only certain ones you can use?? not sure though.. later
Posted by mustanggt5091 (Member # 444) on
:
I have it in my 88GT behind a windsor
Posted by Beavis (Member # 5610) on
:
on my prev stang i had a cf, the mechanic didn't install it right and was crappy as fk, but i was told the clutch was like that...dunno, i personally would go another route..
Posted by h8louzn (Member # 1075) on
:
I had one in my 92 gt, lasted for 4 years of beating.Run 13.10@ 109.9 many times on street tires.
Will be getting another one shortly!
Posted by RobertTS (Member # 1022) on
:
It grabs GREAT, but I do feel it chatters quite a bit for my taste..
Posted by 1992gtdrop (Member # 4502) on
:
How do you think this clutch would with an aluminum flywheel?
Thanks
[ April 24, 2005, 10:08 AM: Message edited by: 1992gtdrop ]
Posted by BlackDrop50 (Member # 1715) on
:
My DF CF doesn't chatter, pedal pressure is lightest of any 5.0 clutch I've tried. Grabs very good no slippage even with power and drag radials
Fueled by Ford Mustang Owners
on CaliforniaFords.com