This is topic Heads or blower?? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010946
Posted by CALYPSO (Member # 3853) on
:
What's better stock heads w/blower, or installing alluminum heads?
Posted by Jeff S (Member # 371) on
:
You will make more power with stock heads and a blower compared to aftermarket heads with no blower.
Posted by JoeT (Member # 298) on
:
that's kind of a personal preference thing. installing a blower and no other mods can be quite potent although is rare. A complete S-trim package tends to be a bit more expensive than a H/C/I one as well. Best of both worlds would be probably to do both.
Installing just heads and nothing else isn't going to pick up a ton of power either.
So if it's just heads, or just blower, definitely blower.
If it's H/C/I or blower, that is kinda a personal preference thing. Why not H/C/I + blower.
Posted by 92stangLX (Member # 3252) on
:
Heads will cost you less but a blower will give you more power. On the other hand, if you put heads on your car right now you can always add a blower later and make serious power ![[Big Grin]](biggrin.gif)
If it were my car I would put on heads and a cam and then save up money and put the blower on later.
If you only want to do one or the other then I would get a Vortech S-trim and run 8lbs of boost.
Just make sure your motor is in good conditon (good compression, no smoking issues, ect) before you do either one.
Fueled by Ford Mustang Owners
on CaliforniaFords.com