This is topic what rear end gears in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010840

Posted by 94DropTop (Member # 5072) on :
 
got a ?

what rear end gears do you think i should go with sn95 conv i have a built 306 im thinking to add 75 100 shot oww i got a tremec 3650 i dont know 3.55 or 3.73 what do u think
 
Posted by AJBlackGT (Member # 3936) on :
 
3.73s [burnout]
 
Posted by SilverLX351 (Member # 3207) on :
 
I would say go with the 3.73's too.
 
Posted by JohnB (Member # 969) on :
 
You sure about that tranny? [Confused] Should be a T-5. I'd recommend 3.73's.
 
Posted by I Fear No Five O (Member # 5185) on :
 
3.73s for sure
 
Posted by 94DropTop (Member # 5072) on :
 
ya sure its a tremec i got this one after i blew apart the other one

[ April 10, 2005, 01:33 PM: Message edited by: 94DropTop ]
 
Posted by JohnB (Member # 969) on :
 
FYI- it's a 3550 then. A 3650 will not bolt to a 302. [Wink]
 
Posted by 94DropTop (Member # 5072) on :
 
realy i got the tremec from a wrecking yard it was stuck in 3rd rebuilt it i know u know ur shit john but i could have swore it was a 3650


there is no way a 3650 will fit? even if u change the bellhousing and ill check
 
Posted by JohnB (Member # 969) on :
 
A 3650 doesn't have a removable bellhousing...

Sure, it will fit...if you've got a modular engine or one hell of an adapter plate.
 
Posted by 94DropTop (Member # 5072) on :
 
good shit thank you every one thanks john im go and put them in

one thing tho will the gears out of a fox 8.8 fit the sn95 8.8
 
Posted by JohnB (Member # 969) on :
 
Yes, they will work. Need someone to do the install for ya? [Big Grin]
 
Posted by 94DropTop (Member # 5072) on :
 
thanks my boy safi with the white cobra told me about u i think ima try to do it my self it learn but i just sent my 351w block to the machine shop and i wanted it done rite so i was wondering it u could put it in for me and the top end of the block but thats like 2 months thakx again
 
Posted by JohnB (Member # 969) on :
 
Right on, good luck with the install. Drop me a PM when you're ready for the engine swap. [patriot]
 
Posted by wilit (Member # 3367) on :
 
Not to piss in your cherios even more, but if you got the tranny from a junk yard, it more than likely isn't a 3550 either. 3550's didn't come in any Ford car. It's more than likely a T45. They're very similar, but a 3550 is built more stout.
 
Posted by 94DropTop (Member # 5072) on :
 
i dunno but u be surprised what u can find at the junk yard the car i pulled it off was a 95 gt that looked like shit on the outside but under the hood there was an afr headed block with a vortec super charger msd full ignition i asked the guy how much for the btm box he said that it was the cars alarm lol 20 bucks and the tremec for 60 its was stuck in gear
 
Posted by h8louzn (Member # 1075) on :
 
Nice find!
 
Posted by knight12 (Member # 4817) on :
 
Damn dude what yard are you going too? [Wink]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com