This is topic Dyno results from 91PONY's new combo: in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010651

---

Posted by 93PONY (Member # 60) on :
 
388 @6400RPM
360 @5200RPM
Rear wheel

Stock block .050 over
Stock crank, off-set ground & lightened
Ported AFR's (2.02/1.60)
FTI custom cam
RPM 2 intake/75MM TB
1 3/4 longtubes & 3-inch exhaust

I'd like to thank JeffS for the tune & Ed Curtis for the go-fast goodies.

Hopefully we'll have some track times next weekend.
 

---

Posted by zpyro35 (Member # 3745) on :
 
nice, I'll make half that hp at the dyno tomorrow
actually, less than half
and isn't ur name 93pony

[ March 19, 2005, 09:07 PM: Message edited by: zpyro35 ]
 

---

Posted by Mr JoCo (Member # 1549) on :
 
impressive
 

---

Posted by zpyro35 (Member # 3745) on :
 
if it's .050 over, what is the displacement? like 310 or something?
edit: nvm found it's 309. i was close!

[ March 19, 2005, 09:12 PM: Message edited by: zpyro35 ]
 

---

Posted by RixSikCobra (Member # 5058) on :
 
Nice numbers.
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
nice numbers should rip. long Rod?
 

---

Posted by FasterDamnit (Member # 442) on :
 
Well done! Damn nice HP vs. displacemant in an EFI combo!
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 

 

---

Posted by 93PONY (Member # 60) on :
 
Offset ground stock crank 3.1 inch stroke
.050 overbore
5.4 rod
319 CI

Should run 120mph+
Hopefully it won't be raining next Saturday for TNT.

[ March 20, 2005, 12:43 AM: Message edited by: 93PONY ]
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
thats what I thought lot of people going to the long rod revers. ET is were it is at
 

---

Posted by season'd 88 (Member # 169) on :
 


[ November 06, 2006, 01:33 AM: Message edited by: season'd 88 ]
 

---

Posted by HungryHippo (Member # 537) on :
 

 

---

Posted by 03SVTPower (Member # 518) on :
 

quote:

---

Originally posted by zpyro35:
nice, I'll make half that hp at the dyno tomorrow
actually, less than half
and isn't ur name 93pony

---

Yeah he is 93pony, the wife is 91pony...
 

---

Posted by -NORCALCOBRA- (Member # 2383) on :
 
Very nice. Car sounds very healty can't wait for my new setup to come along..
 

---

Posted by 93PONY (Member # 60) on :
 

quote:

---

Originally posted by season'd 88:
Congrats on the numbers Shaun. Would be great to see it rip at the track though...and im sure it will. Where did you dyno it? Im guessing had a chip burned via; JeffS. SCT yes?? I pity the pore soul who rolls up next to Heather in say..a corvette or somthing gotta love it.

---

Yeah, Jeff did the tune w/an SCT chip. Great job....even with my 'back seat' tuning. LOL
I have a feeling she'll be smashing some ego's around here.

 

---

Posted by stoauto (Member # 2803) on :
 
dyno jet? either way, impressive #s.
 

---

Posted by Yellow94GT (Member # 431) on :
 
1.21:1 HP to cube ratio.

Not bad
 

---

Posted by 93PONY (Member # 60) on :
 
Dynojet248

Yeah....I was hoping to be up there with Drew at 1.25hp per cube....looks like I've got a few things to do before that'll happen. Hard to keep up with them reverse-splits!
 

---

Posted by Yellow94GT (Member # 431) on :
 
So grind one
 

---

Posted by 91PONY (Member # 206) on :
 
A big thanks to JeffS for tuning my little bitch! Time for the track!!
 

---

Posted by JohnB (Member # 969) on :
 
Nice work Shaun! Hopefully it runs the numbers you want at the track
 

---

Posted by bunchmyfunky (Member # 360) on :
 

quote:

---

Originally posted by 91PONY:
A big thanks to JeffS for tuning my little bitch! Time for the track!!

---

Did he tune you car too Congrats on the numbers
 

---

Posted by nickn (Member # 193) on :
 

quote:

---

Originally posted by stoauto:
dyno jet? either way, impressive #s.

---

no it wasn't on a REAL dyno

congrats to 91pony. I need to get to 1.25 hp per cube myself NA, but im shooting for high 1.2x

[ March 21, 2005, 09:55 PM: Message edited by: nickn ]
 

---

Posted by stoauto (Member # 2803) on :
 

quote:

---

Originally posted by nickn:

quote:

---

Originally posted by stoauto:
dyno jet? either way, impressive #s.

---

no it wasn't on a REAL dyno

congrats to 91pony. I need to get to 1.25 hp per cube myself NA, but im shooting for high 1.2x

---

ok.
 

---

Posted by 91PONY (Member # 206) on :
 
LOL @ Mark.

Nice shop you got there, Nick!
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
I was LOL also but didn't want to say anything. Good luck whipping the boys. Are you going to be driving your car at the track most the time now?
 

---

Posted by 93PONY (Member # 60) on :
 

quote:

---

Originally posted by 2stangs69-91:
I was LOL also but didn't want to say anything. Good luck whipping the boys. Are you going to be driving your car at the track most the time now?

---

First time out we'll both be driving it.....gotta make sure it's track ready.
Once we get a 2-step hooked up (for consistant launching) 90% of the time you'll see Heather driving at the track....it's her car after all....but I can't sit on the sidelines every race! My car isn't track ready.....so she's gonna have to share from time to time.
 

---

Posted by ray95 (Member # 752) on :
 
Nice job kids! Numbers are great!!!
 

---