This is topic what kind of heads are these? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010540

---

Posted by WeStBaY5.0 (Member # 4736) on :
 

thanks guys...
 

---

Posted by 1FAST89GT (Member # 5071) on :
 
NOT MINE.....
 

---

Posted by AJBlackGT (Member # 3936) on :
 
Look like e7s to me...
 

---

Posted by nitrous_bob (Member # 77) on :
 
yeah me too...you can see where the thermactor pipe was hooked up.
 

---

Posted by WeStBaY5.0 (Member # 4736) on :
 
i was just making sure because these were supposibly "not stock"
 

---

Posted by 1FastLX (Member # 1178) on :
 
Look under, around the chambers, there should some more markings.

laters
 

---

Posted by zpyro35 (Member # 3745) on :
 
isn't the e7 casting mark on the underside, above where the lifter valley would be?
 

---

Posted by 1FastLX (Member # 1178) on :
 
yea , it should say E7TE if they were e7's
 

---

Posted by SIDEWAYZ50 (Member # 4868) on :
 
not mine!! e7te were mine
 

---

Posted by blind (Member # 3052) on :
 
if they're "not stock" but iron, check the face of the head that was mounted to the front of the engine for a grouping of slash marks, those are gt40's
 

---

Posted by WeStBaY5.0 (Member # 4736) on :
 
ill check for those markings, so if they have them they are gt40's? what kind of markings?that because i dont see e7te anywhere in the heads,

hey tony, these aren't yours man,

[ March 10, 2005, 08:21 AM: Message edited by: WeStBaY5.0 ]
 

---

Posted by WeStBaY5.0 (Member # 4736) on :
 
ohh yeah these require longer sparkplugs than the e7's...
 

---

Posted by WeStBaY5.0 (Member # 4736) on :
 
okay it says E6SE what kind of heads are they?
 

---

Posted by SIDEWAYZ50 (Member # 4868) on :
 
maybe they are gt40 and you came up?????
 

---

Posted by 306Coupe (Member # 4988) on :
 
http://www.cehighperformance.com/ford_block_car_codes.htm
 

---

Posted by 306Coupe (Member # 4988) on :
 
also check here. They appear to be nothing special http://www.actionsalvage.com/cylheadsford.asp
 

---

Posted by zpyro35 (Member # 3745) on :
 
how in the hell do you read that? I have no idea what any of that means
 

---

Posted by 306Coupe (Member # 4988) on :
 

quote:

---

Originally posted by zpyro35:
how in the hell do you read that? I have no idea what any of that means

---

On the second link just look under casting number and find the correct numbers
 

---

Posted by zpyro35 (Member # 3745) on :
 
I was talking about the first one
 

---

Posted by ShiftyGT (Member # 3862) on :
 
Im no expert on cylinder heads, but i just put a set of gt40's on mine. in the pic you can see the ring around the hole where the head bolt sat. That ring is larger than the one left by a head bolt, its about the same size as one left by an insert washer that the GT40's use. The insert washers i have wont fit on a stock head.

so just from the pic id say GT40
 

---

Posted by JoeT (Member # 298) on :
 

quote:

---

Originally posted by WeStBaY5.0:
okay it says E6SE what kind of heads are they?

---

quote:

---

Originally posted by JoeT:

quote:

---

Originally posted by WeStBaY5.0:
okay it says E6SE what kind of heads are they?

---

Sweet, you've got "upgraded" non-HO '86 heads

Notes: EFI, Cougar, Lincoln, Mercury, Mark VII (exc. LSC), T-Bird, roller lifters

---

Damn im so lucky... these are shitty heads...i thought i had something going... o well
 

---

Posted by 1FAST89GT (Member # 5071) on :
 
should have got mine.........
 

---