This is topic edelbrock 6025 2.02/1.60 heads clearence???? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010400
Posted by SIDEWAYZ50 (Member # 4868) on
:
just came up on a new setup for my edelbrock 6025 2.02/1.60 heads ...i need to know if they'll work with a stock untouched short block with stock pistons...its says it wont due to 2.02 intake valves , but i want to know if anybody has run them on a shortblock with stock pistons..i want to add a bigger cam or just an e cam..maybe different rockers?
[ March 10, 2005, 12:23 AM: Message edited by: SIDEWAYZ50 ]
Posted by JohnB (Member # 969) on
:
They will work, but you're limited in the cam dept. I ran them with a stock 93 shortblock and a TFS stage 1 cam..and BARELY cleared.
Posted by SIDEWAYZ50 (Member # 4868) on
:
i got a e cam with 1.6 roller rockers but i want to know if they'll clear with the 1.7 rockers or the 1.6..i want the 1.7 to get more lift
Posted by specialty (Member # 2978) on
:
i dont think they will clear with 1.7 rockers they will barley clear with 1.6 just make the valve releifs wider
Posted by SIDEWAYZ50 (Member # 4868) on
:
you think they'll clear with 1.6 and an e cam?
Fueled by Ford Mustang Owners
on CaliforniaFords.com