This is topic Carbed 88 project in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010379
Posted by -NORCALCOBRA- (Member # 2383) on
:
Well I have had a 88 torn down for some time car has a salvage title I blew a head gasket in it a while back tore it down to the short block, I wanna do a carb swap on it. I know i will need a Intake, carb, Throttle linkage and a new fuel pump. What else will I need ? I need somthing new to play with because the custom intake manifold for the cobra is not ready yet ![[Big Grin]](biggrin.gif)
..
I already started cleaning up the engine bay welding up the holes and I also cut out the lower radiator support it was smashed from the wreck. And I fabbed up a new piece front feels alot stiffer now when I shake the car and is stronger than stock I also removed all the a/c, smog, front bumper support.
[ February 23, 2005, 11:04 AM: Message edited by: -NORCALCOBRA- ]
Posted by -NORCALCOBRA- (Member # 2383) on
:
I will have some pics of the car on my site soon My site is new and has aloto of pop ups due to the fact that it is free I didn't want to pay for it until I knew I could set it up it is only a day old so bare with me. http://www.xratedcylinderheads.free-websites.com
Posted by AJBlackGT (Member # 3936) on
:
Your going to need a different distribultor setup also.
Posted by sac 5.0 (Member # 2980) on
:
i have the msd dist with the right gear for a hyd roller for 150 and i have the intake and holley 750 for 350 so that would be a start on your project
Fueled by Ford Mustang Owners
on CaliforniaFords.com