This is topic any tips on installin a clutch quadrant in auto? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010351
Posted by LXman25thANNV. (Member # 5359) on :
 
I am swapping in a t-5 in my 1990 5.0 automatic. I have been told that installing the qluthc quadrant is a B!TCH. Is there any way to use the original quadrant made for an automatic? If not then is do you have any tips on installing it? oh yeah any one need a rebuilt auto with overdrive? [dance]
 
Posted by JohnB (Member # 969) on :
 
You need the entire pedal assembly from a manual car. You cannot re-use the stock auto pedals.
 
Posted by LXman25thANNV. (Member # 5359) on :
 
i have a quadrant....i was just hoping there was a kit something...time to go spend a ton of hours swearing. [Whoo Whooooo!]
 
Posted by AJBlackGT (Member # 3936) on :
 
Swapping the pedal assemblies is WAY more of a bitch than popping on a quadrant on a car that already has the manual pedals
 
Posted by SilverLX351 (Member # 3207) on :
 
The pedals arent bad at all, just drop the steering column and take out the driver seat. I have done it without taking the seat out but its not worth it. Stick the quadrant on the new pedal assembly and put it in place...only 5 or 6 bolts hold the pedal assembly in. A really long extention helps a lot too. If you need someone to do it, or the pedal assembly PM me.

I might be interested in your tranny also. Is it an AOD? lmk.

[ February 20, 2005, 09:43 PM: Message edited by: SilverLX351 ]
 
Posted by LXman25thANNV. (Member # 5359) on :
 
check ur pm siver. [patriot]
 
Posted by Sean90GT (Member # 33) on :
 
If you haven't already put the pedals in just put the quadrant on before putting in the manual pedals. Piece of cake. That's what I did.
 
Posted by LXman25thANNV. (Member # 5359) on :
 
cool, thanks
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com