This is topic new can what else should i change in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010273
Posted by fastertoys1 (Member # 5270) on :
 
i have my engine on a stand and am having a new cam put in so i figures might as well change all the little things along the way to help. but i dont know what else to change
here my set up
93 block
gt40 iron heads 1.7 roller r's
cobra intakes 24 inj

im thinking of going sage 1 cam or e303 whats better?
im thinking new double roller chain,new roller lifter, and pushrodes any ones know what brands r good and if i should change anything else
 
Posted by onesicklx (Member # 285) on :
 
you could change the valve springs also...
 
Posted by fastertoys1 (Member # 5270) on :
 
my heads look like their in good condtion does any one know whick is a good timming chain ? and size push rodes i need thanks ? also what brand ands type roller lifter are good thanks anything else
 
Posted by fastertoys1 (Member # 5270) on :
 
can anyone help?
 
Posted by HungryHippo (Member # 537) on :
 
get the ford racing timing chain and roller lifters. they are the cheapest and best for your application. you can reuse stock pushrods.
 
Posted by fastertoys1 (Member # 5270) on :
 
i figured i might as well change the push rodes whille it was taking apart but i dont know what size i need?
 
Posted by HungryHippo (Member # 537) on :
 
ford racing makes hardened stock replacements. i think its like 6.28"
 
Posted by fastertoys1 (Member # 5270) on :
 
can anyon conferm that what else can any one suggest?
 
Posted by The Nick (Member # 2244) on :
 
You obviously have the internet. You can use it to find the things you are asking.
 
Posted by AJBlackGT (Member # 3936) on :
 
Measure your pushrods and order new ones that are the same size if you want to buy new pushrods
 
Posted by fastertoys1 (Member # 5270) on :
 
quote:
Originally posted by The Nick:
You obviously have the internet. You can use it to find the things you are asking.
OBVIOUSLY THATS WHAT IM DOING THIS IS THE TECH SECTION ISNT IT ?
 
Posted by LXman25thANNV. (Member # 5359) on :
 
I would look into a power package to see what they would use, then buy only what u need. Don't overlook the transmission or rear end either once ur horses get real high or u WILL be sorry!
 
Posted by 94gt (Member # 3060) on :
 
quote:
Originally posted by fastertoys1:
quote:
Originally posted by The Nick:
You obviously have the internet. You can use it to find the things you are asking.
OBVIOUSLY THATS WHAT IM DOING THIS IS THE TECH SECTION ISNT IT ?
I think he was trying to say "google it" and figure it out on your own, instead of using this forum for its intended purpose, which is to get tech help about things you may not know about.
 
Posted by HungryHippo (Member # 537) on :
 
if you even tried looking for pushrods, you would see that companies like fms and crane make "stock replacement" hardened pushrods for under $50 so you dont need to know what length they are.
 
Posted by 94gt (Member # 3060) on :
 
maybe he's just curious on the measurement [Wink] [Razz]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com