This is topic Got my gears installed and done at 11:40 in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010254
Posted by gtmustang916 (Member # 3288) on
:
I really dont feel a difference at all except for the change in rpms and certain speeds, i also needed new bearings and new axles so they put in some brand new mosur axles and bearings and some 3.73s----------------- this sucks
Posted by AJBlackGT (Member # 3936) on
:
You dont feel a difference yet because you probably havent hit it at WOT..but hey, everyone did say 4.10s with an AOD
Posted by HungryHippo (Member # 537) on
:
i wasnt impressed with my gears either. the only difference was having to shift more. but you'll be happy with the gears once you get some upper rpm mods
Posted by gtmustang916 (Member # 3288) on
:
Hope fully, the reason why i have been wanting to sell the car is bec its to slow for me and now after the gears it didnt make a difference to me so looks like i have to go to the track to maybe see a difference
Posted by gtmustang916 (Member # 3288) on
:
Thanks for all ur help guys
Posted by BlackDrop50 (Member # 1715) on
:
You got gears and didn't even notice a difference??? That's pretty weird
Shoulda went with 4.10s because AODs suck
Only reason I haven't put gears in my droptop is because I like revving 2000rpms at 85mph
Posted by Cstang50 (Member # 4925) on
:
If you end up converting to a 5 speed you will notice a nice deference I have almost the same thing you are running right know but mine is a 5 speed now. the biggest problem I have is getting the car to hook good luck
Posted by hidnn.o.s. (Member # 1219) on
:
You went the right way with 373's. I have 410's in my 93 AOD and i'd rather have the 373's in a heartbeat. I got these from a friend set up in the rear end already for a killer price, otherwise I would have gone with your gears in a second. I have had two AOD cars, one with the 373's and this one with the 410's. 373's are a better setup i.m.o. I am going to have problems at the track taching out now at 103mph right about at 6k RPM's
Posted by gtmustang916 (Member # 3288) on
:
Well my car completly stock with just some shorties and 2 chambers my car ran a 15.98 "with a little tire spin" now i have a couple things and the gears so hope fully i can run a high 14 or better. I have been thinking of getting a msd setup like the dist. and 6al box and wires will that help any??? Dont have alot of cash or patience. haha! Thanks againg for all the advise and help
[ February 11, 2005, 05:38 PM: Message edited by: gtmustang916 ]
Posted by hidnn.o.s. (Member # 1219) on
:
Your car, tuned right (gap, timing, etc) will run a high 14 no problem.
Goodluck
Posted by Cobra5.0JEEP (Member # 1482) on
:
I didn't really notice a difference with my gears either other than the fact that when i would down shift the car would slow down quicker. Now that i've driven it around a lot i can tell that theres more torque.
Fueled by Ford Mustang Owners
on CaliforniaFords.com