This is topic Cobra lower Intake extra hole???? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010209
Posted by KCmustangboy (Member # 1927) on
:
Just installed my intake and there seems to be a extra hole next to the #5 fuel injector. Its pretty big, looks like a plug or something would go there. screw type fitting. I can take a pic if this makes no sense. Thanks Casey
Posted by SilverLX351 (Member # 3207) on
:
It's 1 of 2 things:
ACT sensor (between the #5 & #6 injector)
OR
Temperature sending unit for the stock guage(in front of the #5 injector)
both should be on your stock lower.
Posted by HungryHippo (Member # 537) on
:
you need to plug it with a NPT plug. you can get it in the plumbing section of osh. i think its 3/8" but probably not, my memory sucks
Posted by 306Coupe (Member # 4988) on
:
quote:
Originally posted by HungryHippo:
you need to plug it with a NPT plug. you can get it in the plumbing section of osh. i think its 3/8" but probably not, my memory sucks
I just want to say, hungryhippo you're a kool "older" Kat ![[Big Grin]](biggrin.gif)
Posted by SilverLX351 (Member # 3207) on
:
lets see a pic...because the only plug I know of goes by the #8 injector...
Posted by HungryHippo (Member # 537) on
:
i hate being old ![[Frown]](frown.gif)
the hole is for the act sensor, but on 94/95's its in the intake tubing so you plug it.
Posted by SilverLX351 (Member # 3207) on
:
Oh I see, I was thinking on a fox.
Posted by JoeT (Member # 298) on
:
if that's a cobra lower, your ACT sensor (coolant) goes on the lower there as well though I forget on which runner.
If that's an explorer lower (looks identical otherwise to the cobra lower), that's the IAT sensor (air temperature) that on explorer's and SN-95's is located on the intake. on fox cars it's off the stock airbox.
otherwise I also believe the SN-95 cobra lower has the IAT sensor and ACT sensors both on the lower intake. Find 'em on your old intake and slap them in beatch!
Posted by KCmustangboy (Member # 1927) on
:
quote:
Originally posted by HungryHippo:
you need to plug it with a NPT plug. you can get it in the plumbing section of osh. i think its 3/8" but probably not, my memory sucks
This would be correct, not sure if the size is it but I am going to ace right now.
Posted by NvrEnough89GT (Member # 5086) on
:
3/8 inch plug you are correct ![[patriot]](graemlins/patriot.gif)
Posted by ShiftyGT (Member # 3862) on
:
plug it... i just pulled my cobra lower off.
Fueled by Ford Mustang Owners
on CaliforniaFords.com