This is topic Goodbye Speed Density in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010183
Posted by marc (Member # 4238) on :
 
i bought an 87GT and it has a speed density system on it, of course i want to mod it so i need to get rid of that.

Whats parts do i need, and how do i go about swapping it for a mass air?

Thanks,
Marc
 
Posted by The Nick (Member # 2244) on :
 
You'll need an MAF computer, the wiring harness (I bought mine at www.pro-flow.com ) and a MAF sensor. You might be able to use your stock ducting, but I used the C&L elbow. That's about it.

Next time, try and search the old thread. This has been answered like 50 times.

[ February 05, 2005, 11:27 AM: Message edited by: The Nick ]
 
Posted by CDT (Member # 5004) on :
 
http://www.stangnet.com/tech/maf/massairconversion.html
 
Posted by zpyro35 (Member # 3745) on :
 
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7951845647&category=33553&sspagename=WDVW
[dance]
 
Posted by 93ex-chp (Member # 1688) on :
 
id recommend buying the ford kit that is just an easy plug in... i did it the other way and it was kinda a pain in the ass.
 
Posted by carajo (Member # 4426) on :
 
the ford kit is hella money,if its still aval.
just get someone to do it for you. [Wink] cheaper than the ford kit.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com