This is topic HELP ON PICKING AN INTAKE in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=010047

---

Posted by GOHST FLAMED 90GT (Member # 5251) on :
 
I AM LOOKING TO BUY A NEW UPPER AND LOWER INTAKE FOR MY 90GT, I HAVE A FEW BOLT ON'S. HEADERS, PULLYS, X-PIPE, COLD AIR INTAKE, AND A SUPER CHIPS. I WAS WONDERING WHAT WOULD BE THE BEST SET UP FOR MY CAR
 

---

Posted by Fostang (Member # 3752) on :
 
edelbrock...
 

---

Posted by twstd5o (Member # 1981) on :
 
trickflow...
 

---

Posted by HungryHippo (Member # 537) on :
 
cobra or gt40 on a stock engine
ported stocker is good and cheap too

[ January 24, 2005, 03:27 PM: Message edited by: HungryHippo ]
 

---

Posted by BlowN67 (Member # 4229) on :
 
Might as well add another one since u all posted different ones.. I dont like them but the new BBK one. the first three post will work fine
 

---

Posted by cvr 5.0 (Member # 2962) on :
 
edelbrock all the way
 

---

Posted by jaybquick (Member # 4286) on :
 
Can't go wrong with an edelbrock especially since all their intakes except the Vicotr 5.0 are "replacement parts" therefore smog legal. Gotta love that in Cali. My RPMII checked out fine when I smogged.
 

---

Posted by AJBlackGT (Member # 3936) on :
 
Eddy performer or RPM depending on what your future plans are with the car
 

---

Posted by SydeWayzSix (Member # 2222) on :
 
how about the Typhoon intake...any good in comparison to those mentioned above?
 

---

Posted by FasterDamnit (Member # 442) on :
 

quote:

---

Originally posted by SydeWayzSix:
how about the Typhoon intake...any good in comparison to those mentioned above?

---

Will do the same if you clean them up-

How-to--> http://www.fordmuscle.com/archives/2003/12/efiintake/index.shtml
 

---

Posted by SydeWayzSix (Member # 2222) on :
 
dont mean to steal this thread... but would completely gutted and gasket-matched Cobra intakes be better than a Typhoon intake (cleaned up)? The heads will be port & polished Cobra intakes using GT-40 valves (they supposedly flow a few more cfm's more than stock GT-40 heads). What would be the best intake to use in this circumstance? Thanks
 

---

Posted by FasterDamnit (Member # 442) on :
 
Nope. It does not have the plenum volume to feed at high rpm's. My case was unique as my Cobra was cut up and had the plenum area doubled.
 

---

Posted by SydeWayzSix (Member # 2222) on :
 
so a cleaned-up Typhoon it is thanks.
 

---