This is topic Supercharger pully change in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009950

---

Posted by 306Coupe (Member # 4988) on :
 
Do I have to use a puller to change my pully? Or is there another way?
 

---

Posted by 92stangLX (Member # 3252) on :
 
I used an impact wrench on my Vortech. Not sure how the pulleys are on other blowers.
 

---

Posted by 306Coupe (Member # 4988) on :
 
it's a vortech. Also would I have to take the charger off the car to do it?
 

---

Posted by JohnB (Member # 969) on :
 
Naa, you should have enough room. Pull the upper hose off the radiator, use an Impact with a swivel. The bolt is fairly short. be careful not to lose the washer! Make sure you put Loc-tite on the bolt when you re-install it.
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
when I changed my pulley I had to use a puller. The new pulley should just slide on.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com