This is topic Cam question in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009828

---

Posted by J's90-LX (Member # 2987) on :
 
I wanted to get some opinions on a cam for my setup.
70,000 mile shortblock
performer intake
24#injectors
edelbrock 6037 heads mildly ported
1.6 rockers
65mm tb
73mm maf


I was thinkin about goin with the XE274HR but i wanted to get some opinions before i purchase it.

[ January 02, 2005, 11:55 AM: Message edited by: J's90-LX ]
 

---

Posted by 93PONY (Member # 60) on :
 
Great cam, but you'll probably have piston to valve contact unless you retard it a little bit....& even then it'll be VERY close if it clears.

I like the X303 on a 112ICL (retarded 4 degrees) with your setup.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com