This is topic oil burning in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009739

---

Posted by 94 droptop (Member # 5072) on :
 
i have a brand new 306 in my car the cam has like 465 lift 112 cl my car is eating oil like its gas i drained it today and there was like 1 qt what could it be ???????????????????????
 

---

Posted by HungryHippo (Member # 537) on :
 
who built it? its toasted rings or valve seals if its not leaking
 

---

Posted by T-TopTerror (Member # 480) on :
 
You sure it's not leaking? What about the exhaust color/smell? Try rollin' on it hard in third and see if it's smoking and leaving a little visible trail. When my motor got tired of being on the bottle it started burning oil bad under throttle. It needed new rings.
 

---

Posted by 9lbpony (Member # 3510) on :
 
check the upper intake - oil loves to puddle in there if the PCV isn't quite right.
 

---

Posted by Mrk50LX (Member # 5147) on :
 
What type of oil are you using? normal,syn blend or a full syn? if your using a blend or full syn that may be your problem. because the syn won't let the components seat like normal oil does. most people i know wait 5,000 miles before switching to a syn.
 

---

Posted by 94 droptop (Member # 5072) on :
 
thanks alot i didnt know what it was so i striped the whole topend of the engine and got some gt40p heads trick flow intake mass air 30lb injetors and throtel body it was a bent valve
 

---

Posted by specialty (Member # 2978) on :
 
check the pcv valve it could just be sucking oil threw the intake if not than the ring are gone or intalled wrong up side down or in wrong poss.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com