This is topic Dropped a washer inside my Distributor(HELP) in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009605

---

Posted by Eddie510 (Member # 2354) on :
 
what should i do? haullin said to pull my motor out which i am already doing. but should the washer be inside the oil pan? wow , gotta take this whole shit out for this fucking little metal washer thanks eddie
 

---

Posted by GOTULKN (Member # 4933) on :
 
i used a long thin magnet once...
 

---

Posted by Eddie510 (Member # 2354) on :
 

quote:

---

Originally posted by GOTULKN:
i used a long thin magnet once...

---

and did it work??lol i just tried that and it got stuck between a gear.
 

---

Posted by wilit (Member # 3367) on :
 
If you're already pulling the motor out why are you asking how to get the washer out? Just pull the motor, drop the oil pan and grab the washer.
 

---

Posted by Eddie510 (Member # 2354) on :
 

quote:

---

Originally posted by wilit:
If you're already pulling the motor out why are you asking how to get the washer out? Just pull the motor, drop the oil pan and grab the washer.

---

i know huh,lol. i was just asking if it SHould be in the oil pan. stupid me
 

---

Posted by AL STOCK (Member # 1852) on :
 

quote:

---

Originally posted by Eddie510:

quote:

---

Originally posted by wilit:
If you're already pulling the motor out why are you asking how to get the washer out? Just pull the motor, drop the oil pan and grab the washer.

---

i know huh,lol. i was just asking if it SHould be in the oil pan. stupid me

---

God Dammit ALL DAY, your always having fun with your Stang huh, take it E-Z bro - Goodluck
 

---

Posted by 92stangLX (Member # 3252) on :
 
Get one of those pickup tools with the extendable claw on the end like this one

http://shop.store.yahoo.com/toolsplus/ull16.html
 

---

Posted by mtbaughs (Member # 4052) on :
 
Don't pull the motor. Get yourself a motor support brace. The kind I use for K-member swaps allows you to remove the K-member and oil pan without removing the motor. This would be much easier. The brace would run ya maybe $60-$70
 

---

Posted by sic5pointSLOW (Member # 4347) on :
 
::sings:: where oh where could my washer be... oh where oh where could it beeeee...
 

---

Posted by HaulinAssMaro (Member # 541) on :
 

quote:

---

Originally posted by mtbaughs:
Don't pull the motor. Get yourself a motor support brace. The kind I use for K-member swaps allows you to remove the K-member and oil pan without removing the motor. This would be much easier. The brace would run ya maybe $60-$70

---

quote:

---

Originally posted by sic5pointSLOW:
::sings:: where oh where could my washer be... oh where oh where could it beeeee...

---

its almost out. how should i take it out? tranny and motor or just the motor. thanks eddie.
 

---

Posted by mtbaughs (Member # 4052) on :
 
Well it sounds like the motor is on its way out anyhow. With the pan out you would have access to most everything from under the car but in any case good luck
 

---

Posted by Eddie510 (Member # 2354) on :
 
hell yeah!! took it out. iw was in the oil pan. now i gotta put everything back in:(. this is the lazy part
 

---