nitrous - Northern California Ford Owners

This is topic nitrous in forum Tech Talk at Northern California Ford Owners .

To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009481

Posted by TURLX50 (Member # 3928) on :

hey guys i just picked up a kit by nos and i was wondering what wires go where i got it from some guy at school theres alot of wires and no labels.. if anyone could help that would be great thankx....

Posted by HungryHippo (Member # 537) on :

there shouldnt be a lot of wires

Posted by TURLX50 (Member # 3928) on :

i think theres 8 or 9 like 3or 4 form the rlay and then like 4 or so in the solenoids

Posted by 67stang (Member # 549) on :

answers:
http://www.fordmuscle.com/archives/2004/09/NitrousWorks/index.php

Posted by 88blackstanggt (Member # 4654) on :

bring it over here ill figure it out cause im good with that kind of stuff.

Posted by TURLX50 (Member # 3928) on :

hey you down ill come buy tommarow around 6 and we can do this

Posted by TURLX50 (Member # 3928) on :

also have another question of what kida of spark plugs should i use and what timing i should run i have and ecam if that means anything??? im also running ngk spark plugs now... and 16 degrees of timing

Posted by slidewayz94 (Member # 3101) on :

how big of a shot do you plan to run? Need to know. Your proabbly gonna run plugs that 1-2 steps colder than stock.

Posted by TURLX50 (Member # 3928) on :

around 100 or 125

Posted by nitrous_bob (Member # 77) on :

stock plugs are fine w/ 100 shot...cool weather go with 10*-12* hot go about 10*

gap your plugs smaller though...maybe about .045"

i'm guessing this is the 5115 dry kit??

off the power selonoid.....

orange to power

blue to nitrous selonoid (2 wired together then 1 to ground, 1 to fp safety switch(optional) then to ground.

green to microswitch to ground.

red to arming switch pin #2
pin #1 arming switch needs a switched 12 volt power (there is 1 in the fuse box unused)
pin #3 arming switch to ground

it sounds more complicated than it is.

you should be able to get a schematic from nos...which is now holley

Posted by TURLX50 (Member # 3928) on :

its a wet kit... where is the best place to tap in to the fuel system??

Posted by TURLX50 (Member # 3928) on :

ttt

Posted by nitrous_bob (Member # 77) on :

check out this link...

http://www.holley.com/HiOctn/TechServ/TechInfo/NOSTech6b.html

Fueled by Ford Mustang Owners
on CaliforniaFords.com