This is topic rattle in bellhousing in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=009362

---

Posted by Stuntrider50 (Member # 4127) on :
 
i recently finished a t5 conversion in my 90 5.0 installed everything new except tranny new cable new throttle bearing new clutch and pressure plate car ran great for a week then i got a rattle i found out the rattle is coming from the bellhousing no difference between clutch beining in or out it doesn't effect the performace but is very annoying i got one guys opion he said it was probaly the throttle bearing even though it is brand new i need help
 

---

Posted by 1WICKEDmach (Member # 4060) on :
 
I would take it apart to make sure no bolts came off the pressureplate. The last thing you want it for that clutch disk to come apart. Especially if you dont have a scattershield.
 

---

Posted by 2stang (Member # 4237) on :
 
What brand clutch?
 

---

Posted by Stuntrider50 (Member # 4127) on :
 
the clutch is a king cobra
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com