This is topic can u fit a 2004 3650 tremec in a 88lx in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=008291

---

Posted by street_illegal_stang (Member # 1554) on :
 
i found one superlow miles
for 500 bucks compleTE.
WILL IT FIT?
the 6spd is outta a 2004 mustang
i'm willing to weld some plates for a crossmember.
thanks
 

---

Posted by wilit (Member # 3367) on :
 
The 3650 isn't a 6 speed.
 

---

Posted by bunchmyfunky (Member # 360) on :
 
Personally I wouldn't put a 3650 in. There are no aftermarket rebuild kits for it and the only place that I know of that can actually work on these and get parts is Ford. I've been down this road before when I blew up my 3650.
 

---

Posted by JoeT (Member # 298) on :
 
T-56 is a sweet tranny, in Vipers, Fbods, and the '03+ cobras.

that's the 6-speed, if it's $500 run and get it.
 

---

Posted by street_illegal_stang (Member # 1554) on :
 
woupssy,
yeah its a 5 spd.
so i take the install has been had on a fox body stang.
yeah joe,500$..
anyone esle think i should kick down the cash for a t-3650?
 

---

Posted by Black94 5.0 (Member # 655) on :
 
Does anyone make a bell housing for a 3650 to a 302???????...

Save your money and buy the new TKO500 or TKO600...
 

---

Posted by 93PONY (Member # 60) on :
 
We've got a bunch of spare 3650's at work. I looked into swapping one into 91PONY's car. The bellhousings do NOT bolt up to a 302....not even close. Not to mention the difference in input shaft length & the different output shaft splines used. Although, simply getting a stock driveshaft with the tranny should be close enough to the length needed.
 

---

Posted by 02roush2 (Member # 2272) on :
 
plus the 3650 is a very crappy tranny I'm on my third and I have two other friends that are getting grinds in 2nd and 3rd for the second time.
 

---

Posted by 1BAD2V (Member # 2495) on :
 

quote:

---

Originally posted by 02roush2:
plus the 3650 is a very crappy tranny I'm on my third and I have two other friends that are getting grinds in 2nd and 3rd for the second time.

---

ditto 3650 is even crappier than the T45...get a TKO.
 

---

Posted by street_illegal_stang (Member # 1554) on :
 
THANKS
anyone selling a good manual trans w/no problems?
please pm me $$$.00
must work with 302.
t-5's are cool t-56,
tremec 3550,tko,tkoII

i need a trans is the bottom line a.s.a.p.
i have 1,2nd and 5th..starting to burn my new ram clutch
scroze are fried on 4th,3rd grinds bad.
thanks
-J
 

---

Posted by SEMPERFI510 (Member # 627) on :
 

quote:

---

Originally posted by 93PONY:
We've got a bunch of spare 3650's at work. I looked into swapping one into 91PONY's car. The bellhousings do NOT bolt up to a 302....not even close. Not to mention the difference in input shaft length & the different output shaft splines used. Although, simply getting a stock driveshaft with the tranny should be close enough to the length needed.

---

want to sell me a tranny or give me one. My 3650 now grinds. The one I changed my t-45 too which has me pissed.
JOhnny

[ July 01, 2004, 01:20 PM: Message edited by: SEMPERFI510 ]
 

---