This is topic brake conversion in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=008184
Posted by 5.0ford (Member # 3962) on
:
i have a 93 lx 5.0 w/ the stock brake system on it. i am looking to upgrade to disc brakes all the way around and a 5-lug pattern for my rims. what is a good brand that sells a complete kit and where would i order it from? thanks
Posted by 66 AC COBRA (Member # 904) on
:
ive got a baer 13" brake system for the front of a foxbody
13" rotors completely smooth, never been turned
very big 2 piston calipers
set up for 5 lug
comes with an sn95 spindle, will bolt directly to fox arm
also comes with the griggs gr40 ump steer kit
$1700 in parts, with 2k miles on it
$500 firm
Posted by JoeT (Member # 298) on
:
ppi sells oe ford bullit/cobra 13" 2-piston brembo front brake setups including pads, rotors and lines/shields for $400 for the front end (5-lug obviously) and about the same for the rear. you can usually junkyard/find a set of spindles for the conversion for less than $100
hawk pads are a low-cost upgrade, available anywhere. big advantage in $$$ for parts when you use off the shelf ford parts.
[ June 20, 2004, 01:27 AM: Message edited by: JoeT ]
Fueled by Ford Mustang Owners
on CaliforniaFords.com