T O P I C R E V I E W
|
93gt
Member # 2558
|
posted
89 5.0 with trick flow track heat heads 1.7 roller rockers, edelbrock victor 5.0 manifold, 75mm throttle body, AFM power pipe, 30lb. injectors, 80mm mass air, bbk longtubes, dr. gas x-pipe, and 150 shot of nitrous. Also how much horsepower should i be putting out and what would my quarter mile time be on BFG Drag radials.
|
AJBlackGT
Member # 3936
|
posted
custom
|
66 AC COBRA
Member # 904
|
posted
is this a stock shortblock with factory pistons, that have not be notched for bigger valves
u will be limited a great deal cam wise if u didnt notch the stock pistons
5 speed or auto, what rear gears, daily driver (hope not) or weekend beater
and my guess is mid 12's NA, mid 11's on the 150 shot if u dont slide everywhere
|
66 AC COBRA
Member # 904
|
posted
and yes i will say that the obligatory custom cam will work the best
but if u are looking at an off the shelf cam, the comp cams extreme energy cams work very very well
|
FasterDamnit
Member # 442
|
posted
Trick Flow Stage 1 will clear, but be sure the have the springs for it- The ones TFS recommends for the stage II cam or equivelant. I ran that combo w/ no issues.
|
93gt
Member # 2558
|
posted
whats a good company to get a custom cam from
|
|