This is topic brake ?? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007876
Posted by carajo (Member # 4426) on
:
anybody know if there is a difference in spindels on 94-95 models to say 99-03.i heard that the 99 and on bring the wheels out,but i dont know.
Posted by Black94 5.0 (Member # 655) on
:
I'm not sure...I'd be interested in knowing too...
Posted by mtbaughs (Member # 4052) on
:
Well the sn95 spindles are all the same for 94 and 95 be it from a V6, GT or cobra. The '96+ newer units will work, but the track will increase 8mm per side.
Posted by mtbaughs (Member # 4052) on
:
Some additional info for Fox conversions
0.330" tall spacer, 5/8" inside diameter , 1.5" outside diameter (or a stack of washers totaling 0.330"). This is needed to properly fasten the crown nut on the lower control arm ball joint (the fox ball joint is about 1/2 taller than the SN95s and you will run out of threads). If you are buying new tubular A arms, get them with the SN95 ball joints
Fueled by Ford Mustang Owners
on CaliforniaFords.com