This is topic what is the best nitrous manifold? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007852
Posted by 93gt (Member # 2558) on :
 
what do you guys think would be the best manifold for my setup i have trick flow twisted wedge track heat heads, 4in. AFM power pipe, 80mm mass air, 30lb. injectors, bbk longtubes, dr. gas x-pipe, crane 1.7 roller rockers, n-21 cam,pullies, 70mm throttle body and looking to buy a plate system for whatever manifold is best.
 
Posted by Black94 5.0 (Member # 655) on :
 
I'd buy a Performer RPM...I'm pretty sure they sell the plate system for Edelbrock manifolds....
 
Posted by 66 AC COBRA (Member # 904) on :
 
u have all that on a stock intake [Razz]

damn man, thats kinda funny

but in all seriousness, u dont need a plate kit unless u want to squeeze over a 150 hp shot on a 302

unless a 200 or bigger shot is being used the plate kit is not worth the extra money


I have sold nitrous for a while, i make more money selling plates than single nozzles, but i dont like to sell someone somehting they dont need, if u dont want to run race gas and a built motor, then u dont need anything more than a basic single nozzle kit

yes u can squeeze bigger than a 150 on a stock shortblock but i do not recommend it
 
Posted by 66 AC COBRA (Member # 904) on :
 
but for an intake, i would get the performer rpm

NX makes a plate kit for just about any intake so dont worry about that, just get the intake u want, any aftermarket intake will be better than stock
 
Posted by baymustang (Member # 3246) on :
 
i'd i get the tirck flow track heat to match your heads or the holley system max is also very good
 
Posted by 93gt (Member # 2558) on :
 
i want to squeeze a 150 shot but what manifold is gonna give me the most power. also about how much horsepower should i have on motor and on nos
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com