This is topic Stereo question.... in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007707
Posted by Cobra5.0JEEP (Member # 1482) on :
 
OK i got a Amp in my Jeep and 2 12s in my room (from the Jeep) I want to install them into my 95 GT Mustang with the stock Mach 460 stereo. How do i connect the signal wires up to the radio/CD player?
 
Posted by 88bird (Member # 1424) on :
 
Get a converter to change the speaker signal to a rca signal, then into the amp. You can get them at any stereo shop, or electronics store.
 
Posted by blind (Member # 3052) on :
 
radio shack sells a little box that takes a signal that goes to a speaker and makes it into a pre-amp signal for an amp. Take one off your rear speakers so you can adjust the bass with your factory fader/EQ easy.
 
Posted by 87 Saleen (Member # 1549) on :
 
Jeeps don't knock huh?
 
Posted by slidewayz94 (Member # 3101) on :
 
Try this
 
Posted by Cobra5.0JEEP (Member # 1482) on :
 
quote:
Originally posted by 87 Saleen:
Jeeps don't knock huh?
Jeep used to hit hard but i didn't like the sluggish feeling i'd get with the extra weight in the Jeep. Plus it looked like the rear of my Jeep was sagging [Eek!]
 
Posted by Cobra5.0JEEP (Member # 1482) on :
 
quote:
Originally posted by slidewayz94:
Try this
thank you very much.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com