This is topic MM torque arm and BBK O/R x-pipe in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007218
Posted by The Nick (Member # 2244) on
:
In the install instructions, it says that some modifications to the crossover pipe might be needed. Does anyone have any experience with the combination of these two products so that I know what needs to be done before I get the car on the rack?
Posted by Black94 5.0 (Member # 655) on
:
"Some aftermarket H-pipes position the crossover tube closer to the rear of the car than the stock H-pipe...If you are unfortunate enough to have one of these H-pipes, the crossover tube will have to be cut out and moved forward to provide clearence for the Torque-arm crossmember..."~MM
Basically, unless you can weld you need to take it to a muffler shop and move the center section/crossover so that the cross member can fit....
You only need to do that if your H-pipes crossover tube is too far back and doesn't fit..... ![[patriot]](graemlins/patriot.gif)
Posted by The Nick (Member # 2244) on
:
Yeah, I got that part of it. I was just curious to see if anyone has had any experience with these two parts and whether or not they did have to move the crossover section. Thanks for the help though.
Fueled by Ford Mustang Owners
on CaliforniaFords.com