This is topic '95 axle/spindle swap Q: in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007206
Posted by The Nick (Member # 2244) on
:
Ok, say I swap over all the SN95 5.0L suspension and I wanted to get new shocks/struts. Would I get ones made for an 87-93 or for an SN95? Also, are there any other parts that won't bolt right over? The rear axle has a MM torque arm, lower control arms, and panhard bar. These will fit on a Fox if the whole axle is swapped over, right?
Any other info I need?
Posted by Black94 5.0 (Member # 655) on
:
The 87-93 shock/struts are shorter than a 94+ shock/strut...If your car is a 79-93 just install 79-93 shocks/struts....You can install 79-93 shocks/struts on a lowered 94+ car though....
Torque arm and lower control arms should work fine...The Panhard MM lists as a different part# for the 94+ compared to the 79-93, so you'll have to call and find out the differences...I dont see why it shouldn't work though....
Posted by The Nick (Member # 2244) on
:
The panhard will work. It says HERE that the part number is the same for both. I'll have to invest in some foxbody shocks/struts then, huh?
Posted by Black94 5.0 (Member # 655) on
:
Cool,
1979-98 (No longer separate part for 1979-93 and 1994-98 ![[Big Grin]](biggrin.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com