This is topic Gaskets Help Quick in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007199
Posted by Tryin2GoFast (Member # 3166) on
:
Which Gasket kit to buy for 302 about to get a set of gt-40's and cobra intake? I was looking at summit part # FEL-KS2337 Link .
Should i pick up a whole kit or buy each gasket i need individually? Thanks for the help guys.
[ March 13, 2004, 04:45 PM: Message edited by: Tryin2GoFast ]
Posted by Black94 5.0 (Member # 655) on
:
Are you goin to change the cam at the same time too?...If not you won't need the timming cover and water pump gaskets
I would just buy the gaskets individually...I'd get some high quality head gasket, intake gaskets and some cork valve cover gaskets...
Make sure that the Cobra intake you're buying has the plenum upper to lower intake gasket, or you'll have to buy one of those too...
Posted by Tryin2GoFast (Member # 3166) on
:
Im going to change the cam..so the kit that i linked will have everything i need right? Are the felpro gaskets in the kit not good enough for my use? The only addition that i might add to the car is a small nitrous shot.
Posted by Tryin2GoFast (Member # 3166) on
:
TTT
Posted by jph331 (Member # 665) on
:
Do not use cork gaskets. Too many times I have seen oil pumps seize because of the little metal button cork gaskets use. They fall into the motor and manage to find a way into the oil pump. Spend the $20-$30 for reusable metal gaskets.
Fueled by Ford Mustang Owners
on CaliforniaFords.com